Propriedades reológicas e mecânicas de compósitos e nanocompósitos poliamida 12 e montmorilonita

Abstract

This work studied the rheological and mechanical properties of polyamide 12 modified montmorillonite clays and bentonita (the organo-modified commercial montmorillonite and a bentonite modified by various routes. Two polyamides 12 were used for the polyamide matrix, a virgin and another reprocessed. The polyamide 12 reprocessed was derived from tailings lines of fluid transport in automotive vehicles. Ten different compositions were prepared in single-screw extruder, and subsequently molded test specimens by injection. For formulations reprocessed polyamide 12, were added 5 to 7 wt.% of a commercial organo-modified montmorillonite ( I44P ) and the virgin polyamide 12 , 3 and 5 wt.%. For virgin polyamide matrix, also formulations were studied with 3 and 5% by weight of bentonite treated with Agent Titanate. The nanocomposite structure formation was evaluated by X-ray diffraction. For all developed formulations, mechanical and rheological tests, and their results were correlated performed: polyamide matrices, the content and the treatments of the clays. Clay dispersion and morphology of the fracture surface were analyzed by SEM. The analysis results showed distinct mechanical and rheological behaviors depending on the type of matrix, the degree of dispersion of clay, content and type of treatment of clays. There was formation of nanocomposites for polyamide 12 modified with I44P clay and composites for polyamide 12 modified bentonite. The rheological properties confirm the increase of the elastic properties of the nanocomposites due to the restriction to macromolecular mobility. The addition of organophilic commercial montmorillonite (I44P) promoted the increased stiffness of the nanocomposites without significant loss of toughness.